Efficient energy use, sometimes simply called energy efficiency, is the goal to reduce the amount of energy required to provide products and services. For example, insulating a home allows a building to use less heating and cooling energy to achieve and maintain a comfortable temperature. Installing fluorescent lights, LED lights or natural skylights reduces the amount of energy required to attain the same level of illumination compared with using traditional incandescent light bulbs. Improvements in energy efficiency are generally achieved by adopting a more efficient technology or production process or by application of commonly accepted methods to reduce energy losses.
There are many motivations to improve energy efficiency. Reducing energy use reduces energy costs and may result in a financial cost saving to consumers if the energy savings offset any additional costs of implementing an energy efficient technology. Reducing energy use is also seen as a solution to the problem of reducing greenhouse gas emissions. According to the International Energy Agency, improved energy efficiency in buildings, industrial processes and transportation could reduce the world's energy needs in 2050 by one third, and help control global emissions of greenhouse gases.
Energy efficiency and renewable energy are said to be the twin pillars of sustainable energy policy and are high priorities in the sustainable energy hierarchy. In many countries energy efficiency is also seen to have a national security benefit because it can be used to reduce the level of energy imports from foreign countries and may slow down the rate at which domestic energy resources are depleted.
Energy efficiency has proved to be a cost-effective strategy for building economies without necessarily increasing energy consumption. For example, the state of California began implementing energy-efficiency measures in the mid-1970s, including building code and appliance standards with strict efficiency requirements. During the following years, California's energy consumption has remained approximately flat on a per capita basis while national U.S. consumption doubled. As part of its strategy, California implemented a "loading order" for new energy resources that puts energy efficiency first, renewable electricity supplies second, and new fossil-fired power plants last. States such as Connecticut and New York have created quasi-public Green Banks to help residential and commercial building-owners finance energy efficiency upgrades that reduce emissions and cut consumers' energy costs.
Lovins' Rocky Mountain Institute points out that in industrial settings, "there are abundant opportunities to save 70% to 90% of the energy and cost for lighting, fan, and pump systems; 50% for electric motors; and 60% in areas such as heating, cooling, office equipment, and appliances." In general, up to 75% of the electricity used in the U.S. today could be saved with efficiency measures that cost less than the electricity itself. The same holds true for this is home and there is 78% of electricity uses D in your homehome-owners, leaky ducts have remained an invisible energy culprit for years. In fact, researchers at the U.S. Department of Energy and their consortium, Residential Energy Efficient Distribution Systems (REEDS) have found that duct efficiency may be as low as 50–70%. The US Department of Energy has stated that there is potential for energy saving in the magnitude of 90 Billion kWh by increasing home energy efficiency.
Other studies have emphasized this. A report published in 2006 by the McKinsey Global Institute, asserted that "there are sufficient economically viable opportunities for energy-productivity improvements that could keep global energy-demand growth at less than 1 percent per annum"—less than half of the 2.2 percent average growth anticipated through 2020 in a business-as-usual scenario. Energy productivity, which measures the output and quality of goods and services per unit of energy input, can come from either reducing the amount of energy required to produce something, or from increasing the quantity or quality of goods and services from the same amount of energy.
The Vienna Climate Change Talks 2007 Report, under the auspices of the United Nations Framework Convention on Climate Change (UNFCCC), clearly shows "that energy efficiency can achieve real emission reductions at low cost."
Modern appliances, such as, freezers, ovens, stoves, dishwashers, and clothes washers and dryers, use significantly less energy than older appliances. Installing a clothesline will significantly reduce one's energy consumption as their dryer will be used less. Current energy efficient refrigerators, for example, use 40 percent less energy than conventional models did in 2001. Following this, if all households in Europe changed their more than ten-year-old appliances into new ones, 20 billion kWh of electricity would be saved annually, hence reducing CO2 emissions by almost 18 billion kg. In the US, the corresponding figures would be 17 billion kWh of electricity and 27,000,000,000 lb (1.2×1010 kg) CO2. According to a 2009 study from McKinsey & Company the replacement of old appliances is one of the most efficient global measures to reduce emissions of greenhouse gases. Modern power management systems also reduce energy usage by idle appliances by turning them off or putting them into a low-energy mode after a certain time. Many countries identify energy-efficient appliances using energy input labeling.
The impact of energy efficiency on peak demand depends on when the appliance is used. For example, an air conditioner uses more energy during the afternoon when it is hot. Therefore, an energy efficient air conditioner will have a larger impact on peak demand than off-peak demand. An energy efficient dishwasher, on the other hand, uses more energy during the late evening when people do their dishes. This appliance may have little to no impact on peak demand.
Buildings are an important field for energy efficiency improvements around the world because of their role as a major energy consumer. However, the question of energy use in buildings is not straightforward as the indoor conditions that can be achieved with energy use vary a lot. The measures that keep buildings comfortable, lighting, heating, cooling and ventilation, all consume energy. Typically the level of energy efficiency in a building is measured by dividing energy consumed with the floor area of the building resulting in specific energy consumption (SEC):
However, the issue is more complex as building materials have embodied energy in them. On the other hand, energy can be recovered from the materials when the building is dismantled by reusing materials or burning them for energy. Moreover, the when the building is used, the indoor conditions can vary resulting in higher and lower quality indoor environments. Finally, overall efficiency is affected by the use of the building: is the building occupied most of the time and are spaces efficiently used — or is the building largely empty? It has even been suggested that for a more complete accounting of energy efficiency, SEC should be amended to include these factors:
Thus a balanced approach to energy efficiency in buildings should be more comprehensive than simply trying to minimize energy consumed. Issues such as quality of indoor environment and efficiency of space use should be factored in. Thus the measures used to improve energy efficiency can take many different forms. Often they include passive measures that inherently reduce the need to use energy, such as better insulation. Many serve various functions improving the indoor conditions as well as reducing energy use, such as increased use of natural light.
A building’s location and surroundings play a key role in regulating its temperature and illumination. For example, trees, landscaping, and hills can provide shade and block wind. In cooler climates, designing northern hemisphere buildings with south facing windows and southern hemisphere buildings with north facing windows increases the amount of sun (ultimately heat energy) entering the building, minimizing energy use, by maximizing passive solar heating. Tight building design, including energy-efficient windows, well-sealed doors, and additional thermal insulation of walls, basement slabs, and foundations can reduce heat loss by 25 to 50 percent.
Dark roofs may become up to 39 °C (70 °F) hotter than the most reflective white surfaces. They transmit some of this additional heat inside the building. US Studies have shown that lightly colored roofs use 40 percent less energy for cooling than buildings with darker roofs. White roof systems save more energy in sunnier climates. Advanced electronic heating and cooling systems can moderate energy consumption and improve the comfort of people in the building.
Proper placement of windows and skylights as well as the use of architectural features that reflect light into a building can reduce the need for artificial lighting. Increased use of natural and task lighting has been shown by one study to increase productivity in schools and offices. Compact fluorescent lights use two-thirds less energy and may last 6 to 10 times longer than incandescent light bulbs. Newer fluorescent lights produce a natural light, and in most applications they are cost effective, despite their higher initial cost, with payback periods as low as a few months.
Effective energy-efficient building design can include the use of low cost Passive Infra Reds (PIRs) to switch-off lighting when areas are unnoccupied such as toilets, corridors or even office areas out-of-hours. In addition, lux levels can be monitored using daylight sensors linked to the building's lighting scheme to switch on/off or dim the lighting to pre-defined levels to take into account the natural light and thus reduce consumption. Building Management Systems (BMS) link all of this together in one centralised computer to control the whole building's lighting and power requirements.
In an analysis that integrates a residential bottom-up simulation with an economic multi-sector model, it has been shown that variable heat gains caused by insulation and air-conditioning efficiency can have load-shifting effects that are not uniform on the electricity load. The study also highlighted the impact of higher household efficiency on the power generation capacity choices that are made by the power sector.
The choice of which space heating or cooling technology to use in buildings can have a significant impact on energy use and efficiency. For example, replacing an older 50% efficient natural gas furnace with a new 95% efficient one will dramatically reduce energy use, carbon emissions, and winter natural gas bills. Ground source heat pumps can be even more energy efficient and cost effective. These systems use pumps and compressors to move refrigerant fluid around a thermodynamic cycle in order to "pump" heat against its natural flow from hot to cold, for the purpose of transferring heat into a building from the large thermal reservoir contained within the nearby ground. The end result is that heat pumps typically use four times less electrical energy to deliver an equivalent amount of heat than a direct electrical heater does. Another advantage of a ground source heat pump is that it can be reversed in summertime and operate to cool the air by transferring heat from the building to the ground. The disadvantage of ground source heat pumps is their high initial capital cost, but this is typically recouped within five to ten years as a result of lower energy use.
Smart meters are slowly being adopted by the commercial sector to highlight to staff and for internal monitoring purposes the building's energy usage in a dynamic presentable format. The use of Power Quality Analysers can be introduced into an existing building to assess usage, harmonic distortion, peaks, swells and interruptions amongst others to ultimately make the building more energy-efficient. Often such meters communicate by using wireless sensor networks.
Green Building XML (gbXML) is an emerging schema, a subset of the Building Information Modeling efforts, focused on green building design and operation. gbXML is used as input in several energy simulation engines. But with the development of modern computer technology, a large number of building energy simulation tools are available on the market. When choosing which simulation tool to use in a project, the user must consider the tool's accuracy and reliability, considering the building information they have at hand, which will serve as input for the tool. Yezioro, Dong and Leite developed an artificial intelligence approach towards assessing building performance simulation results and found that more detailed simulation tools have the best simulation performance in terms of heating and cooling electricity consumption within 3% of mean absolute error.
Leadership in Energy and Environmental Design (LEED) is a rating system organized by the U.S. Green Building Council (USGBC) to promote environmental responsibility in building design. They currently offer four levels of certification for existing buildings (LEED-EBOM) and new construction (LEED-NC) based on a building's compliance with the following criteria: Sustainable Sites, Water Efficiency, Energy and Atmosphere, Materials and Resources, Indoor Environmental Quality, and Innovation in Design. In 2013, USGBC developed the LEED Dynamic Plaque, a tool to track building performance against LEED metrics and a potential path to recertification. The following year, the council collaborated with Honeywell to pull data on energy and water use, as well as indoor air quality from a BAS to automatically update the plaque, providing a near-real-time view of performance. The USGBC office in Washington, D.C. is one of the first buildings to feature the live-updating LEED Dynamic Plaque.
A deep energy retrofit is a whole-building analysis and construction process that uses to achieve much larger energy savings than conventional energy retrofits. Deep energy retrofits can be applied to both residential and non-residential (“commercial”) buildings. A deep energy retrofit typically results in energy savings of 30 percent or more, perhaps spread over several years, and may significantly improve the building value. The Empire State Building has undergone a deep energy retrofit process that was completed in 2013. The project team, consisting of representatives from Johnson Controls, Rocky Mountain Institute, Clinton Climate Initiative, and Jones Lang LaSalle will have achieved an annual energy use reduction of 38% and $4.4 million. For example, the 6,500 windows were remanufactured onsite into superwindows which block heat but pass light. Air conditioning operating costs on hot days were reduced and this saved $17 million of the project's capital cost immediately, partly funding other retrofitting. Receiving a gold Leadership in Energy and Environmental Design (LEED) rating in September 2011, the Empire State Building is the tallest LEED certified building in the United States. The Indianapolis City-County Building recently underwent a deep energy retrofit process, which has achieved an annual energy reduction of 46% and $750,000 annual energy saving.
Energy retrofits, including deep, and other types undertaken in residential, commercial or industrial locations are generally supported through various forms of financing or incentives. Incentives include pre-packaged rebates where the buyer/user may not even be aware that the item being used has been rebated or "bought down". "Upstream" or "Midstream" buy downs are common for efficient lighting products. Other rebates are more explicit and transparent to the end user through the use of formal applications. In addition to rebates, which may be offered through government or utility programs, governments sometimes offer tax incentives for energy efficiency projects. Some entities offer rebate and payment guidance and facilitation services that enable energy end use customers tap into rebate and incentive programs.
To evaluate the economic soundness of energy efficiency investments in buildings, cost-effectiveness analysis or CEA can be used. A CEA calculation will produce the value of energy saved, sometimes called negawatts, in $/kWh. The energy in such a calculation is virtual in the sense that it was never consumed but rather saved due to some energy efficiency investment being made. Thus CEA allows comparing the price of negawatts with price of energy such as electricity from the grid or the cheapest renewable alternative. The benefit of the CEA approach in energy systems is that it avoids the need to guess future energy prices for the purposes of the calculation, thus removing the major source of uncertainty in the appraisal of energy efficiency investments.
Energy efficiency by country
Energy efficiency targets for 2020 and 2030
The EU has set itself a 20% energy savings target by 2020 when compared to the projected use of energy in 2020 – roughly equivalent to turning off 400 power stations. At an EU summit in October 2014, EU countries agreed on a new energy efficiency target of 27% or greater by 2030. One mechanism used to achieve the target of 27% is the 'Suppliers Obligations & White Certificates'.
The Australian national government is actively leading the country in efforts to increase their energy efficiency, mainly through the government’s Department of Industry and Science. In July 2009, the Council of Australian Governments, which represents the individual states and territories of Australia, agreed to a National Strategy on Energy Efficiency (NSEE).
This is a ten-year plan accelerate the implementation of a nationwide adoption of energy efficient practices and a preparation for the country’s transformation into a low carbon future. There are several different areas of energy use addressed within the NSEE. But, the chapter devoted to the approach on energy efficiency that is to be adopted on a national level stresses four points in achieving stated levels of energy efficiency. They are:
- To help households and businesses transition to a low carbon future
- To streamline the adoption of efficient energy
- To make buildings more energy efficient
- For governments to work in partnership and lead the way to energy efficiency
The overriding agreement that governs this strategy is the National Partnership Agreement on Energy Efficiency.
This document also explains the role of both the commonwealth and the individual states and territories in the NSEE, as well provides for the creation of benchmarks and measurement devices which will transparently show the nation’s progress in relation to the stated goals, and addresses the need for funding of the strategy in order to enable it to move forward.
|Efficiency and consumption target||2014||2020||2050|
|Primary energy consumption (base year 2008)||−8.7%||−20%||−50%|
|Final energy productivity (2008–2050)|| 1.6%/year|
|Gross electricity consumption (base year 2008)||−4.6%||−10%||−25%|
|Primary energy consumption in buildings (base year 2008)||−14.8%||−80%|
|Heat consumption in buildings (base year 2008)||−12.4%||−20%|
|Final energy consumption in transport (base year 2005)||1.7%||−10%||−40%|
Recent progress toward improved efficiency has been steady aside from the financial crisis of 2007–2008. Some however believe energy efficiency is still under-recognised in terms of its contribution to Germany's energy transformation (or Energiewende).
Efforts to reduce final energy consumption in transport sector have not been successful, with a growth of 1.7% between 2005–2014. This growth is due to both road passenger and road freight transport. Both sectors increased their overall distance travelled to record the highest figures ever for Germany. Rebound effects played a significant role, both between improved vehicle efficiency and the distance travelled, and between improved vehicle efficiency and an increase in vehicle weights and engine power.:12
On 3 December 2014, the German federal government released its National Action Plan on Energy Efficiency (NAPE). The areas covered are the energy efficiency of buildings, energy conservation for companies, consumer energy efficiency, and transport energy efficiency. The policy contains both immediate and forward-looking measures. The central short-term measures of NAPE include the introduction of competitive tendering for energy efficiency, the raising of funding for building renovation, the introduction of tax incentives for efficiency measures in the building sector, and the setting up energy efficiency networks together with business and industry. German industry is expected to make a sizeable contribution.
A 2011 Energy Modeling Forum study covering the United States examines how energy efficiency opportunities will shape future fuel and electricity demand over the next several decades. The US economy is already set to lower its energy and carbon intensity, but explicit policies will be necessary to meet climate goals. These policies include: a carbon tax, mandated standards for more efficient appliances, buildings and vehicles, and subsidies or reductions in the upfront costs of new more energy efficient equipment.
Industries use a large amount of energy to power a diverse range of manufacturing and resource extraction processes. Many industrial processes require large amounts of heat and mechanical power, most of which is delivered as natural gas, petroleum fuels and as electricity. In addition some industries generate fuel from waste products that can be used to provide additional energy.
Because industrial processes are so diverse it is impossible to describe the multitude of possible opportunities for energy efficiency in industry. Many depend on the specific technologies and processes in use at each industrial facility. There are, however, a number of processes and energy services that are widely used in many industries.
Various industries generate steam and electricity for subsequent use within their facilities. When electricity is generated, the heat that is produced as a by-product can be captured and used for process steam, heating or other industrial purposes. Conventional electricity generation is about 30% efficient, whereas combined heat and power (also called co-generation) converts up to 90 percent of the fuel into usable energy.
Advanced boilers and furnaces can operate at higher temperatures while burning less fuel. These technologies are more efficient and produce fewer pollutants.
Over 45 percent of the fuel used by US manufacturers is burnt to make steam. The typical industrial facility can reduce this energy usage 20 percent (according to the US Department of Energy) by insulating steam and condensate return lines, stopping steam leakage, and maintaining steam traps.
Electric motors usually run at a constant speed, but a variable speed drive allows the motor’s energy output to match the required load. This achieves energy savings ranging from 3 to 60 percent, depending on how the motor is used. Motor coils made of superconducting materials can also reduce energy losses. Motors may also benefit from voltage optimisation.
Industry uses a large number of pumps and compressors of all shapes and sizes and in a wide variety of applications. The efficiency of pumps and compressors depends on many factors but often improvements can be made by implementing better process control and better maintenance practices. Compressors are commonly used to provide compressed air which is used for sand blasting, painting, and other power tools. According to the US Department of Energy, optimizing compressed air systems by installing variable speed drives, along with preventive maintenance to detect and fix air leaks, can improve energy efficiency 20 to 50 percent.
The estimated energy efficiency for an automobile is 280 Passenger-Mile/106 Btu. There are several ways to enhance a vehicle's energy efficiency. Using improved aerodynamics to minimize drag can increase vehicle fuel efficiency. Reducing vehicle weight can also improve fuel economy, which is why composite materials are widely used in car bodies.
More advanced tires, with decreased tire to road friction and rolling resistance, can save gasoline. Fuel economy can be improved by up to 3.3% by keeping tires inflated to the correct pressure. Replacing a clogged air filter can improve a cars fuel consumption by as much as 10 percent on older vehicles. On newer vehicles (1980s and up) with fuel-injected, computer-controlled engines, a clogged air filter has no effect on mpg but replacing it may improve acceleration by 6-11 percent.
Turbochargers can increase fuel efficiency by allowing a smaller displacement engine. The 'Engine of the year 2011' is a Fiat 500 engine equipped with an MHI turbocharger. "Compared with a 1.2-liter 8v engine, the new 85 HP turbo has 23% more power and a 30% better performance index. The performance of the two-cylinder is not only equivalent to a 1.4-liter 16v engine, but fuel consumption is 30% lower."
Energy-efficient vehicles may reach twice the fuel efficiency of the average automobile. Cutting-edge designs, such as the diesel Mercedes-Benz Bionic concept vehicle have achieved a fuel efficiency as high as 84 miles per US gallon (2.8 L/100 km; 101 mpg-imp), four times the current conventional automotive average.
The mainstream trend in automotive efficiency is the rise of electric vehicles (all@electric or hybrid electric). Hybrids, like the Toyota Prius, use regenerative braking to recapture energy that would dissipate in normal cars; the effect is especially pronounced in city driving. Plug-in hybrids also have increased battery capacity, which makes it possible to drive for limited distances without burning any gasoline; in this case, energy efficiency is dictated by whatever process (such as coal-burning, hydroelectric, or renewable source) created the power. Plug-ins can typically drive for around 40 miles (64 km) purely on electricity without recharging; if the battery runs low, a gas engine kicks in allowing for extended range. Finally, all-electric cars are also growing in popularity; the Tesla Model S sedan is the only high-performance all-electric car currently on the market.
Cities around the globe light up millions of streets with 300 million lights. Some cities are seeking to reduce street light power consumption by dimming lights during off-peak hours or switching to LED lamps. It is not clear whether the high luminous efficiency of LEDs will lead to real reductions in energy, as cities may end up installing extra lamps or lighting areas more brightly than in the past.
There are several ways to reduce energy usage in air transportation, from modifications to the planes themselves, to how air traffic is managed. As in cars, turbochargers are an effective way to reduce energy consumption; however, instead of allowing for the use of a smaller-displacement engine, turbochargers in jet turbines operate by compressing the thinner air at higher altitudes. This allows the engine to operate as if it were at sea-level pressures while taking advantage of the reduced drag on the aircraft at higher altitudes.
Air traffic management systems are another way to increase the efficiency of not just the aircraft but the airline industry as a whole. New technology allows for superior automation of takeoff, landing, and collision avoidance, as well as within airports, from simple things like HVAC and lighting to more complex tasks such as security and scanning.
Alternative fuels, known as non-conventional or advanced fuels, are any materials or substances that can be used as fuels, other than conventional fuels. Some well known alternative fuels include biodiesel, bioalcohol (methanol, ethanol, butanol), chemically stored electricity (batteries and fuel cells), hydrogen, non-fossil methane, non-fossil natural gas, vegetable oil, and other biomass sources.
Energy conservation is broader than energy efficiency in including active efforts to decrease energy consumption, for example through behaviour change, in addition to using energy more efficiently. Examples of conservation without efficiency improvements are heating a room less in winter, using the car less, air-drying your clothes instead of using the dryer, or enabling energy saving modes on a computer. As with other definitions, the boundary between efficient energy use and energy conservation can be fuzzy, but both are important in environmental and economic terms. This is especially the case when actions are directed at the saving of fossil fuels. Energy conservation is a challenge requiring policy programmes, technological development and behavior change to go hand in hand. Many energy intermediary organisations, for example governmental or non-governmental organisations on local, regional, or national level, are working on often publicly funded programmes or projects to meet this challenge. Psychologists have also engaged with the issue of energy conservation and have provided guidelines for realizing behavior change to reduce energy consumption while taking technological and policy considerations into account.
The National Renewable Energy Laboratory maintains a comprehensive list of apps useful for energy efficiency.
Commercial property managers that plan and manage energy efficiency projects generally use a software platform to perform energy audits and to collaborate with contractors to understand their full range of options. The Department of Energy (DOE) Software Directory describes EnergyActio software, a cloud based platform designed for this purpose.
Energy efficiency and renewable energy are said to be the “twin pillars” of a sustainable energy policy. Both strategies must be developed concurrently in order to stabilize and reduce carbon dioxide emissions. Efficient energy use is essential to slowing the energy demand growth so that rising clean energy supplies can make deep cuts in fossil fuel use. If energy use grows too rapidly, renewable energy development will chase a receding target. Likewise, unless clean energy supplies come online rapidly, slowing demand growth will only begin to reduce total carbon emissions; a reduction in the carbon content of energy sources is also needed. A sustainable energy economy thus requires major commitments to both efficiency and renewables.
If the demand for energy services remains constant, improving energy efficiency will reduce energy consumption and carbon emissions. However, many efficiency improvements do not reduce energy consumption by the amount predicted by simple engineering models. This is because they make energy services cheaper, and so consumption of those services increases. For example, since fuel efficient vehicles make travel cheaper, consumers may choose to drive farther, thereby offsetting some of the potential energy savings. Similarly, an extensive historical analysis of technological efficiency improvements has conclusively shown that energy efficiency improvements were almost always outpaced by economic growth, resulting in a net increase in resource use and associated pollution. These are examples of the direct rebound effect.
Estimates of the size of the rebound effect range from roughly 5% to 40%. The rebound effect is likely to be less than 30% at the household level and may be closer to 10% for transport. A rebound effect of 30% implies that improvements in energy efficiency should achieve 70% of the reduction in energy consumption projected using engineering models. The rebound effect may be particularly large for lighting, because in contrast to tasks like transport there is effectively no upper limit on how much light could be considered useful. In fact, it appears that lighting has accounted for about 0.7% of GDP across many societies and hundreds of years, implying a rebound effect of 100%.
Organisations and programs
- 80 Plus
- 2000-watt society
- IEA Solar Heating & Cooling Implementing Agreement Task 13
- International Institute for Energy Conservation
- International Energy Agency (e.g. One Watt initiative)
- International Electrotechnical Commission
- International Partnership for Energy Efficiency Cooperation
- World Sustainable Energy Days
- National Development and Reform Commission
- National Energy Conservation Center
- Energy Research Institute, NDRC
- Department of Climate Change and Energy Efficiency
- Department of the Environment, Water, Heritage and the Arts
- Sustainable House Day
- Building energy rating
- Eco-Design of Energy-Using Products Directive
- Energy efficiency in Europe
- Orgalime, the European engineering industries association
- The Carbon Trust
- Energy Saving Trust
- National Energy Action
- National Energy Foundation
- Creative Energy Homes
- Energy Managers Association
- Alliance to Save Energy
- American Council for an Energy-Efficient Economy (ACEEE)
- Building Codes Assistance Project
- Building Energy Codes Program
- Consortium for Energy Efficiency
- Energy Star, from United States Environmental Protection Agency
- Industrial Assessment Center
- National Electrical Manufacturers Association
- Rocky Mountain Institute
- Indian energy strategies
- Data center infrastructure efficiency
- Electrical energy efficiency on United States farms
- Electric vehicle#Efficiency
- Energy audit
- Energy conservation measures
- Energy Efficiency Implementation
- Energy recovery
- Energy resilience
- Energy storage
- Performance per watt
- Lee Schipper
- List of energy storage projects
- List of least carbon efficient power stations
- Negawatt power
- Passenger miles per gallon
- Renewable energy
- Renewable heat
- Standby power
- U.S. Department of Energy Solar Decathlon
- The Green Deal
- World Energy Engineering Congress
- Energy Reduction Assets
- John A. "Skip" Laitner
- Passive house
- ↑ Diesendorf, Mark (2007). Greenhouse Solutions with Sustainable Energy, UNSW Press, p. 86.
- ↑ Sophie Hebden (2006-06-22). "Invest in clean technology says IEA report". Scidev.net. Retrieved 2010-07-16.
- ↑ Prindle, Bill; Eldridge, Maggie; Eckhardt, Mike; Frederick, Alyssa (May 2007). The twin pillars of sustainable energy: synergies between energy efficiency and renewable energy technology and policy. Washington, DC, USA: American Council for an Energy-Efficient Economy (ACEEE). Retrieved 2016-04-03.
- ↑ Zehner, Ozzie (2012). Green Illusions. London: UNP. pp. 180–181.
- ↑ "Loading Order White Paper" (PDF). Retrieved 2010-07-16.
- ↑ Kennan, Hallie. "Working Paper: State Green Banks for Clean Energy" http://energyinnovation.org/wp-content/uploads/2014/06/WorkingPaper_StateGreenBanks.pdf
- ↑ "Weatherization in Austin, Texas". Green Collar Operations. Retrieved 2010-07-16.
- ↑ Steve Lohr (November 29, 2006). "Energy Use Can Be Cut by Efficiency, Survey Says....". The New York Times. Retrieved November 29, 2006.
- ↑ http://unfccc.int/files/press/news_room/press_releases_and_advisories/application/pdf/20070831_vienna_closing_press_release.pdf
- ↑ "Ecosavings". Electrolux.com. Retrieved 2010-07-16.
- ↑ "Ecosavings (Tm) Calculator". Electrolux.com. Retrieved 2010-07-16.
- ↑ "Pathways to a Low-Carbon Economy: Version 2 of the Global Greenhouse Gas Abatement Cost Curve". McKinsey Global Institute: 7. 2009. Retrieved February 16, 2016.
- ↑ 13.0 13.1 13.2 13.3 Environmental and Energy Study Institute. "Energy-Efficient Buildings: Using whole building design to reduce energy consumption in homes and offices". Eesi.org. Retrieved 2010-07-16.
- ↑ 14.0 14.1 "Empire State Building Achieves LEED Gold Certification | Inhabitat New York City". Inhabitat.com. Retrieved October 12, 2011.
- ↑ Alison Gregor. "Declared the tallest building in the U.S. — One World Trade Center is on track for LEED.". United States Green Building Council. Retrieved December 12, 2015.
- ↑ Juha Forsström, Pekka Lahti, Esa Pursiheimo, Miika Rämä, Jari Shemeikka, Kari Sipilä, Pekka Tuominen & Irmeli Wahlgren (2011): Measuring energy efficiency. VTT Technical Research Centre of Finland.
- ↑ Most heat is lost through the walls of your building, in fact about a third of all heat losses occur in this area. Simply Business Energy
- ↑ Creating Energy Efficient Offices - Electrical Contractor Fit-out Article
- ↑ Matar, W (2015). "Beyond the end-consumer: how would improvements in residential energy efficiency affect the power sector in Saudi Arabia?". Energy Efficiency. doi:10.1007/s12053-015-9392-9.
- ↑ Yezioro, A; Dong, B; Leite, F (2008). "An applied artificial intelligence approach towards assessing building performance simulation tools". Energy and Buildings. 40 (4): 612. doi:10.1016/j.enbuild.2007.04.014.
- ↑ "LEED v4 for Building Design and Construction Checklist". USGBC. Retrieved 29 April 2015.
- ↑ "Honeywell, USGBC Tool Monitors Building Sustainability". Environmental Leader. Retrieved 29 April 2015.
- ↑ http://jeancarassus.zumablog.com/images/2128_uploads/Fuerst_New_paper.pdf
- ↑ "Visit > Sustainability & Energy Efficiency | Empire State Building". Esbnyc.com. 2011-06-16. Retrieved 2013-08-21.
- ↑ Amory Lovins (March–April 2012). "A Farewell to Fossil Fuels". Foreign Affairs.
- ↑ Pekka Tuominen, Francesco Reda, Waled Dawoud, Bahaa Elboshy, Ghada Elshafei, Abdelazim Negm: Economic Appraisal of Energy Efficiency in Buildings Using Cost-effectiveness Assessment. Procedia Economics and Finance, Volume 21, 2015, Pages 422–430.
- ↑ "Suppliers Obligations & White Certificates". Europa.EU. Europa.eu. Retrieved 2016-07-07.
- ↑ National Strategy on Energy Efficiency, Industry.gov.au, 16 August 2015
- ↑ National Partnership Agreement on Energy Efficiency (PDF), Fif.gov.au, 16 August 2015
- ↑ Federal Ministry of Economics and Technology (BMWi); Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU) (28 September 2010). Energy concept for an environmentally sound, reliable and affordable energy supply (PDF). Berlin, Germany: Federal Ministry of Economics and Technology (BMWi). Retrieved 2016-05-01.
- ↑ The Energy of the Future: Fourth "Energy Transition" Monitoring Report — Summary (PDF). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). November 2015. Retrieved 2016-06-09.
- ↑ Schlomann, Barbara; Eichhammer, Wolfgang (2012). Energy efficiency policies and measures in Germany (PDF). Karlsruhe, Germany: Fraunhofer Institute for Systems and Innovation Research ISI. Retrieved 2016-05-01.
- ↑ Agora Energiewende (2014). Benefits of energy efficiency on the German power sector : summary of key findings from a study conducted by Prognos AG and IAEW (PDF). Berlin, Germany: Agora Energiewende. Retrieved 2016-04-29.
- ↑ Löschel, Andreas; Erdmann, Georg; Staiß, Frithjof; Ziesing, Hans-Joachim (November 2015). Statement on the Fourth Monitoring Report of the Federal Government for 2014 (PDF). Germany: Expert Commission on the "Energy of the Future" Monitoring Process. Retrieved 2016-06-09.
- ↑ "National Action Plan on Energy Efficiency (NAPE): making more out of energy". Federal Ministry for Economic Affairs and Energy (BMWi). Retrieved 2016-06-07.
- ↑ Making more out of energy: National Action Plan on Energy Efficiency (PDF). Berlin, Germany: Federal Ministry for Economic Affairs and Energy (BMWi). December 2014. Retrieved 2016-06-07.
- ↑ Huntington, Hillard (2011). EMF 25: Energy efficiency and climate change mitigation — Executive summary report (volume 1) (PDF). Stanford, CA, USA: Energy Modeling Forum. Retrieved 2016-05-10.
- ↑ 38.0 38.1 38.2 38.3 38.4 Environmental and Energy Study Institute. "Industrial Energy Efficiency: Using new technologies to reduce energy use in industry and manufacturing" (PDF). Retrieved 2015-01-11.
- ↑ Richard C. Dorf, The Energy Factbook, McGraw-Hill, 1981
- ↑ "Tips to improve your Gas Mileage". Fueleconomy.gov. Retrieved 2010-07-16.
- ↑ http://www.eesi.org/files/auto_efficiency_0506.pdf
- ↑ http://www.fueleconomy.gov/feg/pdfs/Air_Filter_Effects_02_26_2009.pdf
- ↑ "Fiat 875cc TwinAir named International Engine of the Year 2011". Green Car Congress.
- ↑ http://www.eesi.org/files/auto_efficiency_0506.pd
- ↑ Nom * (2013-06-28). "La Prius de Toyota, une référence des voitures hybrides | L'énergie en questions". Lenergieenquestions.fr. Retrieved 2013-08-21.
- ↑ http://www.researchandmarkets.com/reports/2763639/global_led_and_smart_street_lighting_market
- ↑ http://www.edmonton.ca/transportation/on_your_streets/street-lighting.aspx
- ↑ Kyba, C. C. M.; Hänel, A.; Hölker, F. (2014). "Redefining efficiency for outdoor lighting". Energy & Environmental Science. 7 (6): 1806. doi:10.1039/C4EE00566J.
- ↑ Dietz, T. et al. (2009).Household actions can provide a behavioral wedge to rapidly reduce U.S. carbon emissions. PNAS. 106(44).
- ↑ Diesendorf, Mark (2007). Greenhouse Solutions with Sustainable Energy, UNSW Press, p. 87.
- ↑ Breukers, Heiskanen, et al. (2009). Interaction schemes for successful demand-side management. Deliverable 5 of the CHANGING BEHAVIOUR project. Funded by the EC (#213217).
- ↑ Template:Kok, G., Lo, S.H., Peters, G.J. & R.A.C. Ruiter (2011), Changing Energy-Related Behavior: An Intervention Mapping Approach, Energy Policy, 39:9, 5280-5286, doi:10.1016/j.enpol.2011.05.036
- ↑ "National Renewable Energy Laboratory. (2012)". En.openei.org. Retrieved 2013-08-21.
- ↑ (American Council for an Energy-Efficient Economy)
- ↑ Huesemann, Michael H., and Joyce A. Huesemann (2011). Technofix: Why Technology Won’t Save Us or the Environment, Chapter 5, "In Search of Solutions II: Efficiency Improvements", New Society Publishers, Gabriola Island, Canada.
- ↑ 56.0 56.1 The Rebound Effect: an assessment of the evidence for economy-wide energy savings from improved energy efficiency pp. v-vi.
- ↑ Greening, Lorna A.; David L. Greene; Carmen Difiglio (2000). "Energy efficiency and consumption—the rebound effect—a survey". Energy Policy. 28 (6–7): 389–401. doi:10.1016/S0301-4215(00)00021-5.
- ↑ Kenneth A. Small and Kurt Van Dender (September 21, 2005). "The Effect of Improved Fuel Economy on Vehicle Miles Traveled: Estimating the Rebound Effect Using U.S. State Data, 1966-2001". University of California Energy Institute: Policy & Economics. Retrieved 2007-11-23.
- ↑ "Energy Efficiency and the Rebound Effect: Does Increasing Efficiency Decrease Demand?" (PDF). Retrieved 2011-10-01.
- ↑ Kyba, C. C. M.; Hänel, A.; Hölker, F. "Redefining efficiency for outdoor lighting". Energy & Environmental Science. doi:10.1039/C4EE00566J.
- ↑ Tsao, J Y; Saunders, H D; Creighton, J R; Coltrin, M E; Simmons, J A (8 September 2010). "Solid-state lighting: an energy-economics perspective". Journal of Physics D: Applied Physics. 43 (35): 354001. doi:10.1088/0022-3727/43/35/354001.